SERIES 300
SERIES 300
The arms from the 300 Series are available in two versions that differ in tube length. In addition to the standard 9-inch version, a 10-inch version is also available. The 300 SERIES shares most of the features of its “older” counterparts, ensuring that customers receive a product manufactured with the same high precision and attention to detail to guarantee optimal operating conditions. The arms feature a removable head, which facilitates cartridge replacement.
The tonearm tube in the 309 model is made of magnesium, while in the 310 model it is made of anodized aluminum. The headshell is made of magnesium. The counterweight is made of a tungsten alloy and is suspended to achieve optimal center-of-gravity distribution. Tracking force is adjusted via an Allen screw located in the counterweight housing. The two-piece base allows for adjustment of both vertical tracking angle (VTA) and horizontal tracking angle (HTA).
Key Features of the 300 SERIES Tonearms
The inner surface is coated with a special compound that dampens any residual vibrations that may arise within the tonearm’s structure itself.
The meticulously machined surface of the magnesium alloy head platform prevents resonance at the point of contact with the cartridge.
A stainless steel spindle with 10-mm ABEC-1 ball bearings mounted on it. The entire assembly is supported by a solid yoke and positioned at the same height as the platter surface, which effectively prevents sound distortion.
A unique assembly method for individual components that ensures high rigidity and guarantees a precise fit of the bearings even before the entire arm is assembled.
The vertical bearing shaft is made of stainless steel and features an integrated 16-mm-diameter flange that connects it to the yoke.
A 23-millimeter-diameter vertical bearing housing made of hardened steel, with a pair of 17-millimeter ball bearings installed. The bearings are widely spaced to prevent the arm from tilting.
A lift that allows for precise lowering and raising of the needle from the surface of the plate. Its range of operation can be adjusted.
A two-piece base that provides high rigidity and enables precise control of arm movement.
A counterweight made of a tungsten alloy, supported at two points and damped. Its special low-inertia design reduces the impact of eccentrically machined plates on the insert’s operation.
The swivel output connector allows for optimal routing of the signal cable. This design also minimizes the transmission of vibrations to the subchassis.
Precisely marked horizontal lines on the arm tube make it easier to adjust the arm to the correct height.
A special template makes it easy to set the optimal horizontal reading angle.
The tool included in the set makes it easy to install the tonearm on any turntable.
Technical Specifications:
| 309 | 310 | |||
| Effective mass | 9,50 | 9,70 | g | |
| A | the distance between the arm’s axis and the insert | 232,32 | 238,50 | mm |
| B | the distance between the axis of the arm and the axis of the plate | 215,35 | 222,00 | mm |
| C | spacing of the screws securing the insert | 12,7 | 12,7 | mm |
| D | offset of the insert axis | 23,204 | 22,569 | o |
| E | linear shift | 91,54 | 91,54 | o |
| F | insert projection | 16,98 | 16,50 | mm |
| G | height above the mounting surface | 56,4 – 87,9 | 56,4 – 87,9 | mm |
| H | the range of the panel’s height relative to the mounting surface within which the arm can be installed | 26,4 – 57,9 | 26,4 – 57,9 | mm |
| J | depth below the mounting surface | 56,75 | 56,75 | mm |
| K | radial play (range of motion) of the counterweight | 73 | 73 | o |
| L | clearance between the cover and the surface of the plate with a 17-mm-high insert | 35 | 35 | mm |
The arm is available in a version with a removable head. You can purchase the arm with gold-colored accents or a fully gold-plated arm (version 309 only).