No. 32
The No. 32 is an uncompromising design with exceptional capabilities for reproducing the subtlest nuances in the music being played. The No. 32 utilizes a combination of a bass reflex port and a vented port. The woofer is a 32-cm driver with a 100-mm voice coil and a 200-mm vented magnet. A 130mm driver operating in a compression chamber and paired with a 48cm-diameter spherical horn handles the midrange frequencies. High frequencies are handled by a 1-inch compression driver with a Mylar diaphragm and a neodymium magnet, paired with a 200-mm spherical horn. The crossover was built using components selected with a 1% tolerance. Both tubes are turned from plywood or laminated wood, depending on the speaker’s finish, and are left in their natural color or painted in a RAL color. The speaker consists of two modules stacked on top of each other. The woofer module (bottom) rests on spikes that isolate it from the floor. The midrange-tweeter module is placed on top of special dampers that prevent the transmission of vibrations. The wide range of finish options for the “speaker” allows it to blend into any interior.
Specifications
| Parameter | Value |
|---|---|
| System | three-way, two-module floorstanding loudspeaker with vent |
| Crossover frequency | 320/1800 Hz |
| Frequency response (±3 dB) | 29–21000 Hz |
| Impedance | 8 ohm |
| Sensitivity | 95 dB |
| Dimensions | 133 × 45 × 70 cm |
| Weight | 100 kg |